Categorical observers for metamerism

A method is proposed to generate categorical colour observer functions (individual colour matching functions) for any field size based on the CIE 2006 system of physiological observer functions. The method combines proposed categorical observer techniques of Sarkar et al with a physiologically-based individual observer model of Asano et al and a clustering technique to produce the optimal set of categorical observers. The number of required categorical observers varies depending on an application with as many as 50 required to predict individual observers' matches when a laser projector is viewed. However, 10 categorical observers are sufficient to represent colour-normal populations for personalized colour imaging. The proposed and recommended categorical observers represent a robust and inclusive technique to examine and quantify observer metamerism in any application of colorimetry.     

具有光照鲁棒的图像匹配方法

针对现有的基于局部特征的图像匹配算法对光照变化敏感、匹配正确率低等问题，提出一种具有光照鲁棒性的图像匹配算法。首先使用实时对比保留去色（RTCP）算法灰度化图像，然后利用对比拉伸函数模拟不同光照变换对图像的影响从而提取抗光照变换特征点，最后采用局部强度顺序模式建立特征点描述符，根据待匹配图像局部特征点描述符的欧氏距离判断是否为成对匹配点。在公开数据集上，所提算法与尺度不变特征变换（SIFT）算法、加速鲁棒特征（SURF）算法、"风"（KAZE）算法和ORB算法在匹配速度和匹配正确率上进行了对比实验。实验结果表明：随着图像亮度差异的增加，SIFT算法、SURF算法、"风"（KAZE）算法和ORB算法匹配正确率下降迅速，所提算法下降缓慢并且正确率均高于80%；所提算法特征点检测较慢和描述符维数较高，平均耗时为23.47 s，匹配速度不及另外四种算法，但匹配质量却远超过它们。对实时性要求不高的系统中，所提算法可以克服光照变化对图像匹配造成的影响。     

大口径管道直管段制作技术应用

针对大口径管道施工过程中存在施工周期长,施工难度大,工程成本高等问题,提出一种新型优化管段分段技术和管段组对方案。结果表明:该制作技术能保证大口管道安装施工顺利进行;有效地解决现有大口径套管安装过程中的技术难题。该方法具有创新性、实用性、可靠性等优点,在工程建设的许多领域,具有推广应用价值。     

Tailoring electromagnetic absorption performances of TiO2/Co/carbon nanofibers through tuning graphitization degrees

Low density, high stability and strong dielectric loss capacity endow carbon-based nanocomposites with superb microwave dissipation performances. Different from grapheme or carbon nanotubes, the graphitization degrees of carbon-based composites derived from the organic precursor pyrolysis can be accurately regulated by controlling the carbonization temperature. As such, their electromagnetic properties can be easily tuned. In this work, we report the preparation of TiO₂/Co/Carbon nanofibers (CNFs) through a combined approach of electrospun and carbonization at different temperatures. The nanofibers with an average diameter of 300 nm were coated by a dense layer of TiO₂ and embedded by Co/CoO nanoparticles. The performance evaluation indicated the composite obtained at 700 °C exhibits remarkably strong absorption of −63.2 dB at 9.8 GHz and wide effective absorption bandwidth of 6.4 GHz with a pretty low filling rate of 15 wt%. Further analysis on the electromagnetic behaviors shows that the composite possesses regulable impedance matching characteristic and absorption performances, implying the huge application potential under various demand conditions.     

Balancing of parallel U-shaped assembly lines

A new hybrid assembly line design, called parallel U-shaped assembly line system, is introduced and characterised along with numerical examples for the first time. Different from existing studies on U-shaped lines, we combine the advantages of two individual line configurations (namely parallel lines and U-shaped lines) and create an opportunity for assigning tasks to multi-line workstations located in between two adjacent U-shaped lines with the aim of maximising resource utilisation. Utilisation of crossover workstations, in which tasks from opposite areas of a same U-shaped line can be performed, is also one of the main advantages of the U-shaped lines. As in traditional U-shaped line configurations, the newly proposed line configuration also supports the utilisation of crossover workstations. An efficient heuristic algorithm is developed to find well-balanced solutions for the proposed line configurations. Test cases derived from existing studies and modified in accordance with the proposed system in this study are solved using the proposed heuristic algorithm. The comparison of results obtained when the lines are balanced independently and when the lines are balanced together (in parallel to each other) clearly indicates that the parallelisation of U-shaped lines helps decrease the need for workforce significantly.     

New spraying process development for inlet deflector roller in a recoiling line

The inlet deflector rollers of a recoiling line are sprayed rollers. Short scratch lines have been found on the surface of steel sheets during commissioning. By adjusting the control parameters of the line and investigating the manufacturing process of inlet deflector rollers,the root cause of the scratches was found. By modifying the manufacturing process of the rollers,the scratches have been thoroughly eliminated,and quality steel sheets have been consistently produced in the recoiling line.     

Indirect adaptive control of nonlinear system via dynamic multilayer neural networks with multi‐time scales

This paper deals with adaptive nonlinear identification and trajectory tracking problem via dynamic multilayer neural network with different time scales. By means of a Lyapunov‐like analysis, we determine stability conditions for the on‐line identification. Then, a sliding mode controller is designed for trajectory tracking with consideration of the modeling error and disturbance. The main contributions of the paper lie in the following aspects. First, we extend our prior identification results of single‐layer dynamic neural networks with multi‐time scales to those of multilayer case. Second, the e‐modification in standard use in adaptive control is introduced in the on‐line update laws to guarantee bounded weights and bounded identification errors. Third, the potential singularity problem in controller design is solved by using new update laws for the NN weights so that the control signal is guaranteed bounded. The stability of proposed controller is proved by using Lyapunov function. Simulation results demonstrate the effectiveness of the proposed algorithm. Copyright © 2014 John Wiley & Sons, Ltd.     

A new wavelet based fault detection,classification and location in transmission lines

This paper deals with the application of wavelet transforms for the detection, classification and location of faults on transmission lines. A Global Positioning System clock is used to synchronize sampling of voltage and current signals at both the ends of the transmission line. The detail coefficients of current signals of both the ends are utilized to calculate fault indices. These fault indices are compared with threshold values to detect and classify the faults. Artificial Neural Networks are employed to locate the fault, which make use of approximate decompositions of the voltages and currents of local end. The proposed algorithm is tested successfully for different locations and types of faults.     

“聚龙一号”装置四层圆盘锥磁绝缘传输线的三维粒子模拟研究

介绍了"聚龙一号"中四层圆盘锥磁绝缘传输线(MITL)的基本理论。在CPIPIC平台上,采用非均匀网格和周期性对称边界条件,建立了"聚龙一号"的四层圆盘锥MITL的三维粒子模拟模型。设置相应的参数并用并行算法模拟得到了该器件中各层在绝缘堆上和MITL中间位置的电流和汇流后的电流,并与理论和实验数据进行相互对比验证。模拟结果表明整个器件在达到磁绝缘状态后具有很高的传输效率,并与实验结果相互验证,为以后进一步的研究提供了保证。     

Solving a new multi-objective multi-route flexible flow line problem by multi-objective particle swarm optimization and NSGA-II

Mass production, meeting the increasing demands of the customers is a necessity. Such a production is mainly dependent on a factory manufacturing called flow line production. This paper deals with special type of production by the name of flexible manufacturing system, assuming the presence of multi processors in each station of a multi-station arrangement. The model debated in the paper possesses three objective functions, the first of which attempts to minimize the weighted delays. The second objective function tries to minimize the capital for the purchase of the processors at stations and the third objective function minimizes the capital dedicated to select the optimum processing route of parts. For the validation of the mathematical model, use has been made of NSAGAII and MOPSO approaches.